As a new technology heat pump drying system, industrial heat pump dryer has the advantages of energy saving, environmental protection, safety, high efficiency and intelligence, and has obvious advantages in energy consumption and drying cost. The heat pump dehydration dryer can achieve a good drying effect on fruit slices, and the drying process is easy and convenient, one-button start, and natural stop at the point, which reduces labor intensity and saves labor costs. It is clean and environmentally friendly during use, and will not cause environmental pollution. The dried fruit is hygienic and meets food safety standards. It can also effectively control the drying time, temperature, humidity, etc. of the dried fruit to ensure the drying quality of the fruit slices.
1. No pollution: The air duct heater of the electric heating drying room is generally heated by a high-efficiency electric heating tube. The drying room adopts a fully enclosed structure, and no waste gas is discharged during the drying process.
2. Simple operation: The heater in the electric heating drying room is easy to operate, and the temperature and humidity can be adjusted in stages. Accurate temperature control, humidity control, the other is over-temperature protection, generally completed by a pop-up temperature control switch.
3. Energy saving: After the electric heating drying room heats up to the operating temperature, the electric heating drying room will stop part of the power output, and start the heat recovery device to reuse the excess heat to achieve the purpose of energy saving.
4. The electric heating drying room heats up quickly and is not affected by environmental factors: if the outside temperature is low, the electric heating drying room still operates at normal temperature, and there will be no heat loss.
1.10CM polyurethane insulation board room, good insulation effect, reduce energy loss
2. Air energy heat pump heat source system, energy saving and environmental protection
3. Jet enthalpy compressor, using two-stage throttling intermediate jet technology, high energy efficiency
4. Modular design of the unit, flexible matching, simple and efficient transportation, installation and disassembly
Item | Heat Pump Dryer Parameter | |||
Model | GG-3P | GG-7P | GG-15P | Unit |
Environment temperature | -10-43 | -15-43 | -15-43 | ℃ |
Drying temperature range | 30-75 | 30-75 | 30-75 | ℃ |
Rated power | 4 | 12 | 21 | Kw |
Maximum power | 10 | 18 | 33 | Kw |
Power supply form | 380/3/50 | 380/3/50 | 380/3/50 | V/Ph/Hz |
Temperature control accuracy | ±1 | ±1 | ±1 | ℃ |
Electric heating power | 6 | 6 | 12 | Kw |
Controller | Single chip microcomputer/PLC+color screen control | |||
Noise level | ≤75 | ≤75 | ≤75 | dB(A) |
Capacity | 100-200 | 300-700 | 800-1500 | Kg |
Dehydration capacity | 9 | 21 | 43 | Kg/h(=50℃,80%) |
Get a free quote, the official service consultant will contact you within 12 hours, please keep the phone or Email open (Information is confidential and not publicly disclosed)